Gaggia Milano MDF 55 Instrucciones De Uso página 13

Dose adjustment
1 Press buttons
time for the selected dose (the time shown in seconds on the display). The
increase or decrease of the expected time for the selected dose varies to one-
tenth of a second.
2 if the button or
of the selected dose is increased or reduced according to the pressure time.
Note: to pause dispensing before the grinding time has elapsed, press one of
the two dose buttons again. The display will show the seconds remaining for the
dose to be fully dispensed. To complete the dose it is necessary to press the dose
button again.
Dose dispensing
1 Dispense by pressing the single dose
selected button will light up.
2 During dispensing, the display will show the time remaining until the set time
is reached.
3 Once dispensing has been completed the grinding time returns to the set
value.The dose counter (single or double) is incremented by one.
Continuous dispensing
1 Press the single dose
symbol will be shown on the display. Continuous dispensing is started by
pressing the single/double dose buttons at the same time, with lighting up of
the corresponding symbols and continues until both are released.
2 Continuous dispensing has a maximum duration of 60 seconds.
3 To exit continuous dispensing mode, press the single dose
button .
Freeze to set dispensing times
1 Keep the and
adjustment function is no longer available and on the display the buttons
and are no longer visible.
2 Keep the and
and to reduce or increase the expected coffee dispensing
, is kept pressed for some seconds (long press), the time
and double dose button
buttons pressed. When releasing them, the dose
buttons pressed to unlock functions.
English
or double dose button
at the same time. The
13
. The
or double dose