English
14
2
1
Dose count
1
When starting the machine, keep pressed for 5 seconds the grinding start up
button (12) and then select one of the counts:
•
Single dose button
•
Double dose button
•
Single dose button
the dispensed continuous doses.
Only the selected buttons remain lit on the display and the numbers of the doses
are shown two by two in succession. For example, if the total number of doses is
142536, the display shows 14, 25 and 36 for two seconds each. After the last pair
of digits, there is a pause of 4 seconds and then the sequence starts again.
2
To exit the count, press the grinding start up button (12).
Display contrast adjustment
1
When starting the machine, keep pressed the grinding start up button (12)
and then press the
display, only the buttons
2
To exit the contrast adjustment, press the grinding start up button (12).
Cleaning and Maintenance
Warning: Disconnect the appliance from the power supply before carrying out any
cleaning and maintenance operations. Do not pull the power cable or the device
itself to remove the plug from the electricity socket.
access to the count of the dispensed single doses;
access to the count of the dispensed double doses;
and double dose button
and
to access the contrast adjustment. On the
and
will stay lit.
access to the count of