Ametek SURGEX AXESS Ready FLATPAK SA-82-AR Guía De Instalación Del Hardware página 35

Idiomas disponibles

________________________________________________________________________________________________

Advanced Network

HTTP Port: Specify the port the web server will be accessed on. If the port is changed from the default

value of 80, the AR may be accessed by specifying the new port number in this format:

http://IPADDRESS:NEWPORT. Example: Navigate to

192.168.1.254 on port 8000.

Linkback URL: This setting allows control of the hotlink displayed on the Goodbye page. It allows use of the

public IP address or DNS name instead of the internal IP address of the AR, which is the default setting. If this

setting is left blank, the hotlink will be the IP address of the unit. Enter up to 128 characters.

Telnet Port: Specify the port to use for telnet access (default 23).

DxP Port: Specify the port to use for

Time Setup: Setup of the time server is required for Scheduling and Logging

functions.

Enable: Enable or disable the use of the time server.

Time Server: Specify the time server. The default is time.nist.gov.

Time

DST Enable: Enable or disable the use of Daylight Savings Time.

DST Start/Stop: Specify the start and stop times for DST.

DxP protocol (default 9100).

Zone: Specify the time zone (-12 to +12) relative to GMT.

SA-82-AR

http://192.168.1.254:8000

Manual del usuario

for an IP address of