Ametek SURGEX AXESS Ready FLATPAK SA-82-AR Guía De Instalación Del Hardware página 41

_________________________________________________________________________________________________________________________
4. Network Commands
Command
get network
set ipmode < static | dhcp >
set ipaddress < dotted decimal >
set subnet < dotted decimal >
set gateway < dotted decimal >
set http port < 0-65535 >
set telnet port < 0-65535 >
set dxp port < 0-65535 >
Set linkback <url>
set timeout < 0-999 >
© AMETEK Electronic Systems Protection, Inc. | Soporte técnico: 800-645-9721 | surgex.com
SA-82-AR
Description
Returns all network settings currently in use. Example:
DHCP
IP Address: 10.1.2.69
Subnet: 255.255.255.0
Gateway: 10.1.2.1
HTTP Port: 80
Telnet Port: 23
DxP Port: 9100
Timeout: 20
Sets the IP address mode. Static mode locks the IP address as
set; DHCP mode allows a DHCP server to assign the address.
Sets the IP address.
Sets the Subnet Mask.
Sets the Gateway address.
Sets the port that the internal Web server listens for incoming
connections on. When set to 0 the web server is disabled. May not be
disabled when Telnet and DxP are both disabled.
Sets the port that the internal Telnet server listens for incoming
connections on. When set to 0 the Telnet server is disabled. May not
be disabled when Web and DxP are both disabled.
Sets the port that the internal DxP service listens for incoming
connections on. When set to 0 the DxP service is disabled. May not
be disabled when Web and Telnet are both disabled.
This command sets the linkback URL displayed on the logout page.
Sets the automatic network timeout in minutes.
User Manual
Admin Fact Def
Yes
Mode:
Yes DHCP
Yes DHCP
Yes DHCP
Yes DHCP
Yes 80
Yes 23
Yes 9100
Yes
Yes 2
40