Kärcher SGV 8/5 Classic Manual Del Usuario página 13

Applying hot water
DANGER
Hot water
Risk of scalding
Avoid contact with hot water.
Note
Hot water (approx. 158 °F / 70°C) in-
creases the cleaning effect. Check the
temperature resistance of the surface
to be cleaned.
1. Set the handwheel to hot water.
2. Press the steam switch. The hot wa-
ter is dispensed as long as the but-
ton is pressed.
Applying cold water
1. Set the handwheel to cold water.
2. Press the steam switch. The cold
water is dispensed as long as the
button is pressed.
Vacuuming operations
1. Start vacuuming operations: Press
the suction button briefly.
2. End vacuuming operations: Press
the suction button again briefly.
Combined operation
1. Press the steam switch and briefly
press the suction button at the same
time. Vacuuming operations start
and steam or hot/cold water is dis-
pensed at the same time.
Emptying the waste water
container
1. Open the cover of the wastewater
container.
2. Press the lock of the wastewater
container upwards.
3. Remove the wastewater container.
4. Unlock the wastewater container
lock and remove the cover.
5. Empty the wastewater container.
Parking the accessories
When there is a short interruption in
the work, the floor nozzle can be put in
the parking position and the steam
suction pipe can be engaged.
Switching off the device
1. Set the turn switch on the device to
"0/OFF".
2. Pull out the mains plug.
Each time after use
WARNING
Danger from spores
Health risk
Select the cleaning location of the de-
vice in such a way that contamination
of the surroundings, food and food pro-
cessing tools and machines,e.g. by
spray water, is excluded.
1. Empty the fresh water reservoir and
dry it.
2. Drain and clean the wastewater con-
tainer and dry it.
3. Clean the accessories thoroughly:
Clean the handle, steam suction
hose and accessory plug with a
damp cloth. Clean the remaining ac-
cessories with hot water and dry
them.
4. Clean the exterior of the device with
a damp cloth.
5. Clean the device with a warm damp
cloth and detergent if it is visibly con-
taminated, or disinfect it if necessary.
Storing the device
Note
Always let the brushes cool down to
prevent deformation of the bristles.
1. Press the accessory plug lock and
pull the accessory plug out of the ac-
cessory socket.
2. Allow the accessories to dry suffi-
ciently and place them in the acces-
sory tray.
English 13