Descargar Imprimir esta página

Kärcher SGV 8/5 Classic Manual Del Usuario página 15

Ocultar thumbs Ver también para SGV 8/5 Classic:

Publicidad

Idiomas disponibles

Idiomas disponibles

● Brush crown: For stairs, automobile
interiors, fabric surfaces in general
(after testing on a concealed area).
For abrasive cleaning and scrub-
bing.
Window cleaning
Note
Preheat the window pane in seasons
with particularly low temperatures. To
do this, lightly steam the entire glass
surface at a distance of approx. 19.7
inches (50 cm). This avoids tension on
the surface that can lead to glass
breakage.
1. Steam the glass surface evenly at a
distance of approx. 7.9 inches (20
cm) to remove the dirt.
2. Switch off the steam supply.
3. Pull off the glass surface in strips
from top to bottom with the squee-
gee and vacuum.
4. Wipe the squeegee and the lower
edge of the window dry if needed.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Place the floor nozzle in the tray at
the back of the device and engage
the steam suction pipe. Separate
the steam suction pipes.
2. Release the parking brakes and
push the device by the push handle.
3. To load the device, grasp it by the re-
cessed grip and the push handle.
4. Pull the device behind you via the
push handle for transporting over
longer distances.
5. When transporting in vehicles, se-
cure the device against rolling away,
slipping and tipping according to the
respectively applicable guidelines.
Empty all containers beforehand.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
The device may only be operated in-
doors.
Care and maintenance
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
DANGER
Danger from hot water, steam and
hot surfaces
Risk of scalding and burns
Allow the device to cool down prior to
all work on the device.
Checking the seals
Note
Damaged or missing O-rings can be
the cause of increased temperatures in
the handle.
1. Regularly check the condition of the
seals (2x O-ring) in the accessory
plug, in the handle and in the steam
suction pipes. If necessary, replace
the seals.
English
Storage
15

Publicidad

loading