Kärcher SGV 8/5 Classic Manual Del Usuario página 5

Contents
IMPORTANT SAFETY INSTRUC-
TIONS ................................................
General notes ....................................
Environmental protection ...................
Hazard levels .....................................
Intended use ......................................
Overview of the device.......................
Symbols on the device....................... 10
Safety devices.................................... 10
Cleaning methods .............................. 10
Initial startup.......................................
Operation ........................................... 12
Use of accessories............................. 14
Transport............................................ 15
Storage .............................................. 15
Care and maintenance....................... 15
Troubleshooting guide........................ 16
Warranty............................................. 17
Accessories and spare parts.............. 17
Technical data .................................... 17
IMPORTANT SAFETY
INSTRUCTIONS
READ ALL IN-
STRUCTIONS BE-
FORE USING
THIS MACHINE
● Inform your dealer immediately if
there is any shipping damage.
● Completely remove the accessories
from the box.
● The machine is not suitable for suck-
ing up hazardous dusts as asbestos.
Please consult your KÄRCHER
branch or your KÄRCHER dealer
with regard to such applications.
● Only operate the appliance from a
grounded outlet. Refer to the Tech-
nical data for the necessary main
fuse.
● Connect to a properly grounded out-
let only. See Grounding Instructions.
SAVE THESE IN-
STRUCTIONS
5
8
When using an electrical machine, ba-
8
sic precautions should always be fol-
8
lowed, including the following:
8
This appliance is intended for com-
9
mercial use.
SAFETY INSTRUCTIONS
WARNING
11
To reduce the risk of fire, electric
shock, or injury:
1 DISCONNECT APPLIANCE FROM
POWER CIRCUIT before removing
the cover, performing maintenance
work, and when not in use.
2 DO NOT LEAVE the machine unat-
tended when plugged in.
3 ALWAYS CHECK THE POWER
SUPPLY CORD for damage or signs
of any aging before each use.
4 DO NOT PULL OR CARRY APPLI-
ANCE BY CORD. Do not use cord
as a handle. Keep cord away from
heated surfaces or fire. Do not close
door on cord or pull cord around
sharp edges.
5 KEEP CORD AWAY FROM HEAT
AND OIL. Do not leave cord lying
around after job is complete. It can
become a tripping hazard.
6 DO NOT RUN MACHINE OVER
CORD.
7 TURN SWITCH TO OFF before un-
plugging power supply cord.
8 DO NOT UNPLUG BY PULLING
CORD. To unplug, grasp plug, not
cord.
9 DO NOT GRASP PLUG WITH WET
HANDS.
English 5