Electrolux ENG7TE75S Manual De Instrucciones página 34

4. CONTROL PANEL
ECOMETER indicator
1
Extra Cool button / indicator
2
Fridge compartment indicator
3
Alarm indicator
4
Door open alarm indicator
5
Freezer compartment indicator
6
Extra Freeze button / indicator
7
Freezer temperature button / indicator
8
Fridge temperature button / indicator
9
Fan button / indicator
10
ECO button
11
4.1 Switching on
Connect the mains plug to the power socket.
To select a different set temperature, refer to
"Temperature regulation".
If appears on the display, refer to
"Troubleshooting".
4.2 Switching off
1. Press and hold the fridge temperature
button and freezer temperature button
simultaneously for 5 seconds
The display shows blinking
2. Once the appliance is switched off, the
display reads
3. Disconnect the mains plug from the
power socket.
4.3 Temperature regulation
The temperature range may vary between
-15°C and -24°C for freezer and between 2°C
and 8°C for fridge.
34 ENGLISH
1 2 3
11 10 9
.
.
4 5 6 7
8
Press the temperature buttons to set the
temperature of the appliance.
The recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
You may set the recommended temperature
manually with temperature buttons or by
switching on the ECO function. Refer to "ECO
function" for more information
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure, the appliance goes
back to the set temperature.
4.4 Switching off the fridge
It is possible to switch off only the fridge
compartment leaving the freezer
compartment on.
1. Press and hold the fridge temperature
button for 5 seconds.
The display shows blinking
2. Once the fridge compartment is switched
off, the display reads
4.5 Switching on the fridge
To switch on the fridge:
1. Press and hold the fridge temperature
button for 5 seconds.
The display shows blinking
2. The fridge compartment is switched on
and the previous set temperature is
restored.
.
.
.