English
1. On/Off/Volume Control knob
2. Status LED
3. Digital Mic 2
4. Display
5. Home button
6. 4-Way Navigation buttons
7. Programmable button 1 (P1)
8. Speaker
9. Programmable button 2 (P2)
10. Notification button
11. Menu Select buttons
12. Accessory Connector
13. Top (Orange) button
Turning the Radio On or Off
Ensure that the battery is fully charged before the first use.
Turning the Radio On
Turn the On/Off/Volume Control knob clockwise until it clicks.
Turning the Radio Off
Turn the On/Off/Volume Control knob counterclockwise until it
clicks.
Selecting Zones and Channels
Rotate the Channel Selector knob to the desired Channel.
Accessing Radio Call Activities
Perform one of the following actions:
To call, press and hold the PTT button.
●
To listen, release the PTT button.
●
To adjust volume, turn the On/Off/Volume Control knob.
●
To monitor, press the programmed Monitor button and listen.
●
2
14 Top Light Bar
15 Channel Selector knob
16 Digital Mic 1
17 Belt Clip Bracket
18 Battery
19 Charging Contacts
20 2-Dot Programmable button
21 1-Dot Programmable button
22 Push-to-Talk (PTT) button
23 3-Dot Programmable button
24 Antenna
Sending an Emergency Alarm
1. Press and hold the Top (Orange) button.
Your radio shows the following indications:
A tone sounds.
●
The red LED illuminates.
●
The display shows Top (Orange) and the current zone/channel.
●
When acknowledgment is received, you hear four beep tones;
●
alarm ends; and radio exits emergency
2. Press and hold the Top (Orange) button to exit emergency.
Sending an Emergency Call
1. Press the Top (Orange) button.
2. Press and hold the PTT button to speak.
3. Release the PTT button to end call.
4. Press and hold Top (Orange) button to exit emergency.
Sending a Silent Emergency Call
1. Press the Top (Orange) button.
2. Silent emergency continues until you perform one of the following:
Press and hold the Top (Orange) button to exit emergency state.
●
Press and release the PTT button to exit the Silent Emergency
●
Alarm mode and enter regular dispatch or Emergency Call mode.
Status Icons
Battery Level
Received Signal Strength Indicator (RSSI)