Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
Reversing the door
The opening side of the door can be changed from the right-hand side (factory preset) to the left-hand
side, if required by the installation site.
Before changing the opening side, disconnect the product from the mains. Make sure that the plug is not
in the socket. You will need the following tools:
We recommend that before resting the freezer on the rear to access the base, you protect it with pac-
king foam or similar material to prevent damage to the rear panel. We recommend that you follow the
steps below to change the opening side.
1. Place the freezer in an upright position.
2. Lift part 1 at the top of the freezer frame on the right-hand side. Then lift off parts 3 and 4 of the door in
the same way. Remove part 2 and place it in the plastic bag.
37
infiniton.es
Publicidad
