Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
3. Disconnect electrical connectors 1 and 2. Then remove part 3.
4. Unscrew screw 1, loosen cable 2 and remove part 3.
We recommend that you hold the door during step 4 to prevent it from falling.
5. Remove the door and place it on a soft surface with the panel facing upwards. Remove parts 1 and 4.
Then loosen screws 2 as shown in the picture. Replace handle 3 to the right-hand side. Then fit screws 2
and parts 1 and 4. Loosen screw 7, remove parts 5 and 6, turn part 6, and then fit parts 5 and 6 on the left
side with screw 7.
38
infiniton.es
Publicidad
