Pari easycare Instrucciones De Uso página 11

Catalogue number 078G6100
1 Important information
Read these instructions for use carefully and completely before
using for the first time. Keep these instructions for use safely so that
you can refer to them again later. If these instructions for use are
not followed, damage to the product cannot be ruled out.
Report serious incidents to the manufacturer and the competent
authority.
Clean the easycare as described in the section entitled Cleaning
before using for the first time.
The connection cord and the controller are also required for
operation. Notes on preparing the controller can be found in the
instructions for use of the eFlow
Cleaning with the easycare cleaning aid is recommended if the
nebulisation time for the same fill volume of a given medication
increases significantly (doubles). Additional information can be
found in the current version of the eFlow
in the chapter "TROUBLESHOOTING".
Use the cleaning aid as necessary, up to twice a week after an
inhalation session and after cleaning the aerosol head
(see sequence of steps in a backwash procedure). More frequent
use is not beneficial, but can instead lead to premature material
wear.
– 2022-11
Cleaning aid for
aerosol heads
rapid nebuliser system.
®
rapid instructions for use
®
en
9