Pari easycare Instrucciones De Uso página 13

The steps of the backwash procedure must be carried
out in the following order without fail:
1. Cleaning the nebuliser handset parts and the aerosol
head*
2. Backwashing the aerosol head with easycare
3. Disinfecting the nebuliser handset parts and the
aerosol head*
* Regarding items 1 and 3 see Chapter "CLEANING AND DISIN-
)
FECTION" in the instructions for use of the eFlow
system.
Life cycle
The expected lifetime of the easycare cleaning aid is 3 years.
3 Preparing for the backwash procedure
– 2022-11
)
)
• Open the cleaning aid.
To do this, press lightly on the lateral
gripping surfaces.
• Unfold the parts.
• Insert the aerosol head.
The aerosol head must be felt to snap
into place upon insertion. Make sure it
is positioned in the right direction.
• Close the cleaning aid. When closing,
ensure that the two lateral engaging
hooks on the cleaning aid are felt to
snap into place.
en
rapid nebuliser
®
11