Johnson COCI90PBB Manual De Instrucciones página 34

D
o not heat closed tin cans and glass jars. The pressure generated inside
will cause the jar to burst.
A
s the sides of the product will get hot during operation, do not place
inflammable substances nearby.
D
o not put baking trays, plates or aluminum foil directly on the base of the
oven. Accumulated temperature may give damage to the base of the
oven.
A
ll around, the ventilation channels should be kept unobstructed.
P
roduct may be hot during use. Do not touch the hot parts, inside of the
oven and heating components, etc.
W
hen placing food inside and taking it out of hot oven, always use heat-
resistant oven gloves.
D
o not use the product when the front glass door removed or broken.
W
hen the oven operates, its rear surface may also get hot. Power
connections should not come into contact with the rear surface; otherwise,
connections may be damaged.
D
o not compress the connection cables to the door of the oven and do not
pass them over hot services. Melting of the cable may cause short circuit and
this could cause fire.
M
ake sure the product is switched off after each use and all knobs are in the
OFF position.
T
he product and accessible parts of the product are hot when operating.
D
o not touch the product while operating.
D
o not use sharp and piercing materials to clean the inside and glass of the
product; such materials may give damage to your product.
A
s hot oil may cause fire, always be careful and attend the product when it
operates.
D
o not attempt to extinguish fire by use of water; immediately disconnect
power of the product and close the burning part by help of a wet blanket.
D
o not keep any flammable or combustible substance in the product.
D
o not use steam cleaner.
D
o not use aggressive cleaning materials or sharp metal scrapers to clean
the oven door (door), that may destroy the surface and cause breakage of
the glass.
T
he appliance must not be installed behind a decorative door in order to
avoid overheating.
T
he appliance is not intended to be operated by means of an external timer
or separate remote-control.
8
V.1