Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and connections
Property damage! Do not use the door and/or handle to move or handle the product.
Mounting of the legs
The legs of the product are not assembled prior to the installation of the product. They
are packed in the bag located inside the oven.
Mount the legs of your product and adjust its height to the kitchen counter.
For the gas-fired ovens, if the legs are not mounted, the oven may not be supplied
sufficiently during use and may impair burning.
Make sure to screw the feet
of the product in place, do
not push them in.
Power connection
The product should be definitely used with an earthed line! The
manufacturer will not be responsible for any damages that may occur if it
is used without earthed line.
Any risk of electric shock, short circuit or fire due to installation made by
unprofessional persons! Connection of the product to the mains may be
performed only by an authorized and competent person and the warranty of
the product is valid only upon correct installation.
Risk of electric shock, short circuit or fire caused by use of damaged power
cable! The power cable should not be crushed, twisted or compressed or should
not contact with hot parts of the product. If the power cable is damaged, it
should be replaced by a competent electrician.
• Mains supply data should be same with the data given on the nameplate of
the unit. Nameplate of the product is on the rear.
• Connection cable of the product should comply with the technical specifica-
tions and power consumption.
Risk of electric shock! Prior to starting any work on the power installation,
please disconnect the product electrically.
11
V.1
Publicidad
