Fein AGWP10 Serie Instrucciones De Uso página 14

OBJ_BUCH-0000000365-001.book Page 14 Monday, February 11, 2019 10:03 AM
en
14
Removing the jaw chuck and the
3-jaw chuck (figure 4).
The jaw chuck and the 3-jaw chuck can be
removed using the two drifts.
Mounting the depth stop (figure 5).
Loosen the handle and insert the depth stop.
Position the depth stop to the required depth
and tighten the handle again.
The depth stop is available as an accessory
(3 21 27 005 00 6).
Fig. 4
Drift
Fig. 5
2.
Depth stop
Handle
3.
Drift
1.