KRATOS SAFETY KS LINE KS 4000 Manual Del Usuario página 45

FA 60 211 30
FA 60 211 50
Anchorage post FA 60 211 XX
For use at end points, intermediate points and corners.
Can be clamped to beams, clamped onto metal beams and attached chemically or mechanically to concrete with 4 M12
Application
stainless steel threaded rods.
Compatible with FA 60 204 00 Intermediate bracket, FA 60 216 90 corner pieces and FA 60 201 00 end plates
Material Galvanized steel
Weight FA 60 211 30 = 10.23 kg / FA 60 211 50 = 12.52 kg
Breaking strength > 26 kN
- 2 x CSK M12x45 bolts, 2 lock nuts and 2 washers for fixing the end plate
Fixings - 1 x hex head M12x25 bolt for fixing an Intermediate bracket.
Use chemical or mechanical anchors for fixing into concrete
Permissible beam - Minimum clamping width: 150 mm
widths - Maximum clamping width: 220 mm
- FA 60 211 30 = 300 mm
Height (H)
- FA 60 211 50 = 500 mm
FA 60 211 30C
FA 60 211 50C
Anchorage post kits
Application Post kit with clamps for clamping onto metal beams
Material
Weight of the com- FA 60 211 30C = 12.15 kg
ponents FA 60 211 50C = 12.97 kg
Breaking strength
Conformity EN 795:2012 Type A in combination with the FA 60 201 00 end plate
- 4 M12x65 bolts, 8 nuts and 8 washers,
- 2 x CSK M12x45 bolts, 2 lock nuts and 2 washers
Fixings for fixing the end plate
- 1 x hex head M12x25 bolt for fixing an Interme-
diate bracket
FA 60 211 30D
FA 60 211 50D
FA 60 211 XXC
Galvanized steel
45
FA 60 211 XXD
Post kit with counter plate for clamping to beams
FA 60 211 30D = 18.30 kg
FA 60 211 50D = 20.07 kg
> 26 kN
- 4 x 350 mm long M12 threaded rods, 16 x M12 nuts
and 8 washers,
- 2 x CSK M12x45 bolts, 2 lock nuts and 2 washers for
fixing the end plate
- 1 x hex head M12x25 bolt for fixing an Intermediate
bracket