Publicidad
Idiomas disponibles
Idiomas disponibles
3. 6 Adjusting air during operation
- Primary air inlet
During normal operation of the burner, once the appliance has warmed up, you must close the primary air
inlet to achieve good combustion performance.
If the quality of the firewood allows it, the primary air inlet must be fully closed or slightly open (no more
than 1 cm).
PRIMARY AIR REGULATION LEVER POSITION FOR NOMINAL POWER, LEAVE OPEN 25% OF ITS RANGE
(8mm.).
- Secondary air inlet
Secondary air adjustment is the one that will provide better combustion that is cleaner and more efficient,
making the most of every load of firewood.
You can adjust the entry of secondary air when the apparatus is hot enough and burning with a good flame.
During normal operation, you must never close the secondary air inlet completely. Normally, the secondary
air must be adjusted to a minimum opening of 15-20%.
SECONDARY AIR REGULATION LEVER POSITION FOR NOMINAL POWER, OPEN 25% OF ITS RANGE.
In order to avoid burns, always use the glove supplied with the apparatus when opening the
door and using the adjustment lever.
22
Publicidad
