Publicidad
Idiomas disponibles
Idiomas disponibles
Except in the case of a chimney fire, don't smother the fire suddenly with water, but let it burn out,
consuming the wood load.
The appliance must be installed on floors with sufficient bearing capacity.
Observe the minimum safety distances from nearby combustible materials. In front of the appliance:
minimum 1.6 m.
Do not use flammable liquids for lighting, maintain them far from the chimney.
Combustible materials must not be installed on the appliance or inside the brickwork.
Flammable materials cannot be used in the installation: not touching the stove, nor in the interior of the
chimney chamber.
On days with adverse draught conditions (very low atmospheric pressure, heavy frosts), or when the flue
is very cold, or in chimneys with a poor draught, you can help the draught to start before lighting the fire
by heating the flue:
1. Prepare the wood for ligh ng inside the wood burner.
2. Place a firelighter or a sheet of newspaper on the deflector at the start of the flue and set fire
to it.
3. After a few seconds, when the chimney draught starts, light the wood as instructed.
24
Rockwool
160
Publicidad
