Descargar Imprimir esta página

Campbell Hausfeld VT4823 Manual De Instrucciones Y Lista De Piezas página 3

Cabezales para compresores de aire

Publicidad

Idiomas disponibles

Idiomas disponibles

BEFORE YOU BEGIN
Introduction
The single stage, oil lubricated air compressor pumps are intended for use as replacements on air
compressor units, and for use as components in specially designed air compressor systems. For replacement
use, the compressor pump must match the vibration characteristics of the original pump. The compressed
air from these pumps is intended to be used with air tools and spray guns. Atmospheric moisture and
trace oil from compressors may require additional treatment for some applications. All models are
equipped with solid cast-iron cylinders and crankcase, an aluminum head and stainless steel valves.
Recommended Oil
Use full synthetic, non-detergent air compressor oil.
Oil Capacity
8.5 oz
UNPACKING
to lift other attached equipment.
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check
for loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit.
In case of questions, damaged or missing parts, please visit www.campbellhausfeld.com for customer
assistance.
Required Items - Not Included
Oil
QUICK REFERENCE
Do not lift or move unit without appropriately rated equipment. Be sure the unit is securely
attached to lifting device used. Do not lift unit by holding onto tubes or coolers. Do not use unit
Do not operate unit if damaged during shipping, handling or use. Damage may result
in bursting and cause injury or property damage.
1

Publicidad

loading

Este manual también es adecuado para:

Vt4923