Publicidad
Idiomas disponibles
Idiomas disponibles
Power connection at hood:
1. Run supply conductors to the hood wiring
box marked "120VAC input". Fig. 3.
2. Remove the wiring box cover.
3. Secure the conduit to the wiring box
through a conduit connector. Fig. 3.
4. Make electrical connections at the hood.
Connect white-to-white, black-to-black
and green-to-ground. Fig. 3.
5. Replace the wiring box cover and
screws. Make sure wires are not pinched
between the cover and box.
POWER CONNECTION AT HOOD
120 Volt 60Hz
LINE-IN
- 11 -
CONNECT:
WHITE-TO-WHITE,
BLACK-TO-BLACK,
GREEN-TO-GROUND.
BOX
MARKED
"120 VAC
INPUT"
FIG. 3
Publicidad
