Adjusting The Seat - Vermeiren Ceres SE Manual De Instrucciones

3.4

Adjusting the seat

L
WARNING
: Risk of injury - Never perform adjustments while you are driving.
L
WARNING
: Risk of injury - Make sure that the seat is locked securely.
Remove seat (Fig. A)

1. Pull the seat lever upwards.

2. Turn the seat a little bit and lift the seat out the adjustment bar
3. Release the seat lever
Lock the seat in place (Fig. A)

1. Pull the seat lever upwards.

2. Place the seat on the adjustment bar
3. Release the seat lever
4. Check that the seat is firmly secured.
Swivel seat (Fig. A)

1. Pull the seat lever upwards.

2. Turn the seat in the desired direction.
3. Release the seat lever
4. Check that the seat is firmly secured.
Depth adjustment (Fig. A)
1. Pull the seat depth adjustment lever  upwards.
2. Move the seat  forward or backward over the seat depth rails .
3. To lock the seat in place, let go of the lever  once the seat  has reached the desired position.
4. Swivel the seat a little until it locks in position.
5. Check the seat is locked securely.
Fig. A
.

and at the same time keep the seat lever

.
,
and the seat will always stop after 90°.
Page 21

.

1 = Seat lever
2 = Seat
3 = Seat depth adjustment lever
4 = Seat depth rails
5 = Adjustment bar
Ceres SE
2018-06
pressed in.