Adjusting The Backrest - Vermeiren Ceres SE Manual De Instrucciones

Fig. B
3.5

Adjusting the backrest

L
1 = Seat system
2 = Tilt lever
3 = Headrest
A tilt lever  has been added to the side of the
backrest (transition to seat upholstery). Press this
lever upwards to release the backrest and fold
the backrest forward, or adjust the angle of the
backrest.
Page 22
Seat height adjustment (Fig. B)
The seat can be adjusted in 2
different seat
(increments: 25 mm).
1. Remove the seat
cover.
2. Remove both screws
.
nuts
3. Move the adjustment bar
upwards/downwards in the

receiver , and place these in
a comfortable seat height.
4. Fasten both screws
.
5. Replace the seat
cover.
6. Check the seat
securely.
WARNING
: Risk of injury - Never
perform adjustments while you are
driving.
Ceres SE
2018-06
heights

and battery

and


and nuts

and battery

is locked