Adjusting The Backrest; Adjusting The Armrests; Adjusting Height Armrests - Vermeiren Mercurius 4 LTD Manual De Instrucciones

3.5

Adjusting the backrest

1 = Seat system
2 = Tilt lever
1
Headrest:
1. Gently press the locking pin  toward the headrest.
2. Move the headrest to the desired height.
3. Let go of the locking pin .
4. The headrest audibly locks into place.
3.6

Adjusting the armrests

L
CAUTION: Risk of tipping over - Make sure that the armrests are positioned symmetrically
from the seat.
L
CAUTION: Risk of injury - Mount the inner tube always with of safe distance of 50 mm in
the outer tube.
The armrest can be adjusted in height and depth.
2
1

3.6.1 Adjusting height armrests

L
CAUTION: Risk of injury - Do not put your fingers,
buckles, clothes, jewelry between the swing away
system of the armpad.
1. Fold the armpad backwards.
2. Loosen the star knob.
3. Grasp the armpad.
4. Move the armpad upwards or downwards until the
desired height (range: 30 mm stepless).
5. Retighten the star knob.
6. Check that the armrest is fixated very well.
Page 22
L
WARNING: Risk of injury - Never perform
adjustments while you are driving.
A tilt lever  has been added to the side of the
backrest (transition to seat upholstery). Pull this
lever upwards to release the backrest and fold
the backrest forward (-75°), or adjust the angle of
the backrest (0°-22°).
1 = Locking pin
Mercurius 4 LTD
2018-09