Publicidad
Idiomas disponibles
Idiomas disponibles
The product must be used and
rested on a flat, stable surface .
When placing the product
on its stand, ensure that the
surface on which the stand is
placed is stable .
The product is not to be used
if it has been dropped, if there
are visible signs of damage or
if it is leaking .
The product must only be used
with the stand provided .
Ensure the rated voltage shown
on the rating label corresponds
with the voltage of the power
supply .
The product demands
increased energy consumption .
Do not connect any other
devices (e .g . heaters, air
conditioners, etc .) to the same
circuit .
The use of extension cords is
not recommended . If the use of
an extension cord is necessary,
it must be designed for a
current flow of at least 10 A .
Lay cords in such a way that
they may not be tripped over
or otherwise damaged .
Do not operate any product
with a damaged power cord
or plug, when the product
malfunctions or has been
damaged in any manner .
Only use the product in dry
indoor rooms .
Do not operate the product
with wet hands or while
standing on a wet floor . Do not
touch the power plug with wet
hands .
Protect the product against
heat . Do not place the product
close to open flames or heat
sources such as stoves or
heating appliances .
Regularly check the power
plug and the supply cord for
damages . If the supply cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard .
Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames and
ensure that nobody can pull on
or trip over it unintentionally .
Stop using the product if the
anti-kink protection on the
power cord is damaged!
GB/IE
21
Publicidad
