ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner when
you wake up and stop it when you leave the house.
Example:
To start the air conditioner next morning and stop it.
Stop
▼ Setting combined TIMER
1. Push the ON TIMER
ON timer.
2. Push the OFF TIMER
OFF timer.
3. Push the SET
•
Either ON or OFF timer function which is closer to the
current time, is activated first.
•
If the same time is set for both ON and OFF timers, no
timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer (setting both
ON and OFF timer simultaneously and
activate every day.)
This feature is useful when you want to use combined
timer at the same time every day.
▼ Setting combined TIMER
1. Push the ON TIMER
ON timer.
2. Push the OFF TIMER
OFF timer.
3. Push the SET
4. After step 3, an arrow mark (
for about 3 seconds and during this flashing,
push the SET
During the every day timer is activating, both arrows (
) are indicated.
Cancel the timer operation
Push the CLR
button.
CLR
Clock display
During the TIMER operation (ON-OFF, OFF-ON, OFF
timer) clock display is disappeared so as to show the
setting time. To see the present time, push SET button
briefly and the present time is displayed about 3 seconds.
11-EN
Operation
Stop
button to adjust the
ON
button to adjust the
OFF
button.
SET
button to adjust the
ON
button to adjust the
OFF
button.
SET
or
button.
SET
) flashes
,
– 11 –