Descargar Imprimir esta página

Kohler K-2431 Guia De Instalacion página 9

Almacenamiento de pared
Ocultar thumbs Ver también para K-2431:

Publicidad

Idiomas disponibles

Idiomas disponibles

Access
Panel
Prop Rod
4. Connect the Electrical Wires
Open Access Panel
If present, close the lavatory drain. This will prevent the locking
screws from falling down the drain during the removal process.
Remove the two locking screws from the underside of the wall
storage. Set the locking screws aside.
Pull the center access panel open, using the prop rod inside
cabinet to hold access panel open.
Access the Wiring Compartment
WARNING: Risk of electric shock. Turn off the electricity at
the circuit breaker or fuse box before proceeding. This will
avoid possible risk of shock.
WARNING: Risk of electric shock. Properly ground the 120
VAC electrical supply inside the wall storage. This will avoid
possible risk of shock.
Remove the top cover from the metal channel to access the wiring
compartment.
NOTE: The strain relief is located on top of the wiring compartment.
Kohler Co.
Remove top cover
from metal channel.
Electrical
Supply
Plastic
Wire Nut
Ground
Bare
Neutral
White
Hot
Black
Locking
Screws
9
Wiring
Compartment
Green or
Bare
Copper
White
Black
1059686-2-B

Publicidad

loading

Este manual también es adecuado para:

K-2432