Descargar Imprimir esta página

JVC KD-G501 Manual De Instrucciones página 19

Ocultar thumbs Ver también para KD-G501:

Publicidad

Idiomas disponibles

Idiomas disponibles

To stop play and eject the CD
Press 0.
CD play stops and the control panel flips down.
The CD automatically ejects from the loading
slot. The source changes to the previously
selected source.
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select "CD" as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected disc is not removed for about
15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
Locating a track or a
particular portion on a CD
To fast-forward or reverse the track
Press and hold ¢
playing a CD, to fast-forward
the track.
4, while playing a CD, to
Press and hold
reverse the track.
To go to the next or previous tracks
Press ¢
playing a CD, to go ahead to
the beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
4 briefly, while playing a CD, to go
Press
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
• To select a track number from 7 – 12:
To go to a track quickly (+10 and –10 buttons)
1
2
, while
briefly, while
Press 1 (7) – 6 (12) briefly.
Press and hold 1 (7) – 6 (12) for more than one
second.
Press MODE to enter the functions mode
while playing a CD.
Press +10 or –10.
To skip 10 tracks* forwards to
the last track
To skip 10 tracks* backwards to
the first track
* First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten (ex.
10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks (see "How to use the +10 and
–10 buttons" on page 20).
• After the last track, the first track will be
selected, and vice versa.
CONTINUED ON THE NEXT PAGE
19

Publicidad

loading

Este manual también es adecuado para:

Kd-g502