Publicidad
Idiomas disponibles
Idiomas disponibles
English
Provided attachments
<Uses>
Aluminium oxide point [5/8˝ (φ15.9 mm) × 1]
Use for wood
engraving and
grinding.
(15.9 mm)
Use to machine hard
Silicon carbide point [3/16˝ (φ4.8 mm) × 1]
materials such as
glass and ceramics.
(4.8 mm)
Use to engrave,
High-speed cutter [1/8˝ (φ3.2 mm) × 1]
grind and make
grooves in wood,
plastic and soft
metals (aluminium,
(3.2 mm)
copper, brass).
Drill [1/8˝ (φ3.2 mm) × 1]
Use to make
holes in wood and
plywood.
(3.2 mm)
Use to slice or cut
Cutting wheel [15/16˝ (φ23.8) × 0.025˝ (t0.6) × 6]
materials.
Suitable for cutting
(23.8 mm)
thin rods and pipes.
Recuts crushed
grooves in screw
Cutting wheel [15/16˝ (φ23.8) × 0.040˝ (t1.0) × 2]
heads.
Do not press hard
(23.8 mm)
against workpiece
as it may crack.
Aluminium oxide grinding wheel
Use to polish hard
[7/8˝ (φ22.2) × 1]
materials such as
stainless steel.
(22.2 mm)
Sanding disc [3/4˝ (φ19.1 mm)/180-grit × 10]
Suitable for fi nal
polishing after rough
grinding.
(19.1 mm)
Polishing wheel [1˝ (φ25.4 mm) × 2]
Use to give smooth
fi nish to metal
surfaces.
(25.4 mm)
Felt polishing wheel [1/2˝ (φ12.7 mm) × 4]
Use for mirror
polishing of jewelry
(12.7 mm)
and metals.
Felt polishing wheel [1˝ (φ25.4 mm) × 2]
Choose the size to
suit the workpiece.
(25.4 mm)
Suitable for tasks
Sanding band [1/2˝ (φ12.7 mm)/60-grit × 6]
such as shaping
wood and fi nishing
models.
(12.7 mm)
Grind in two stages
Sanding band [1/2˝ (φ12.7 mm)/120-grit × 2]
with diff erent grit
numbers to achieve
a good surface
(12.7 mm)
fi nish.
NOTE
Specifi cations are subject to change without any obligation on the part of the HITACHI.
22
5/8˝
3/16˝
1/8˝
1/8˝
15/16˝
0.025˝ (0.6 mm)
15/16˝
0.040˝ (1.0 mm)
7/8˝
3/4˝
180-grit
1˝
1/2˝
1˝
1/2˝
60-grit
1/2˝
120-grit
CAUTION
Standard
attachments
exclusively for use with the
GP10DL. Do not use with other
equipment
such
drills, etc. Doing so may result in
injury or damage to the tip tool.
[Accessory]
Collet spanner (for loosening
tight collet nuts)
Wheel mandrel
[1/8˝ (φ3.2 mm) × 1]
Screw-type mandrel
[1/8˝ (φ3.2 mm) × 1]
Drum mandrel
[1/8˝ (φ3.2 mm) × 1]
are
as
electric
Publicidad
