Publicidad
Idiomas disponibles
Idiomas disponibles
PUMP GUARD
Leaving water inside the pump during freezing weather will cause severe damage to the pump. To avoid costly
damage, always treat the pump with SIMPSON
a lubricating, antifreeze solution.
SIMPSON
®
Pump Guard (purchase separately) is formulated to protect your pump during long-term storage and from
freezing damage. Pump Guard should be used throughout the season to keep the seals pliable and well lubricated.
Before storing the unit for winter or for when there is a chance of freezing weather, use pump guard to remove all
traces of water from the internal cavities while filling them with an antifreeze solution. Pump Guard is insurance for
your investment, use it.
Simply use Pump Guard by following these easy steps:
1. Screw the Pump Guard adapter into the garden hose input on the pump.
2. Press and hold down on the button until all the water and the Pump Guard starts to come out of the high
pressure port.
3. Unscrew the Pump Guard from the pump then prepare the pressure washer for storage as outlined in STORAGE
AND TRANSPORTATION.
14
USING SIMPSON
NOTICE
®
®
PUMP GUARD
PUMP DAMAGE
Pump Guard to remove the trapped water and to fill the pump with
Publicidad
