Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7
F
Unlocked
Locking Trigger (Before Lance Installation)
To lock trigger of spray gun (F), point gun away from you and turn
dial to lock ("3" and "9" position). Squeeze or pull trigger to make
sure it is locked. If the trigger does not move, it is locked.
ALWAYS leave the trigger lock in the LOCKED position when not
in use. This ensures the gun is in "safe" mode until it is ready for
use. Turn dial to unlock ("12" and "6" position) to release spray
gun trigger.
Note: The trigger lock prevents trigger from being accidentally
engaged.
9
J
K
Attach nozzle (J) or rotary nozzle (K) into end of lance (I) by
pressing selected nozzle into place. It will make a "click" sound
when firmly in place.
DO NOT use if a "click" sound was not heard. The nozzle may
not be secured.
Note: Always turn the safety lock dial to lock trigger when
changing lances and nozzles to ensure that they do not
accidentally eject with force during removal.
Locked
I
8
I
Extension Lance Installation
With spray gun (F) in locked position, attach extension lance (I)
directly to spray gun. Insert lance extension into gun, pushing
together and turning clockwise simultaneously. Turn the
extension collar clockwise to lock into place. To remove extension
lance (I), turn extension collar counterclockwise to unlock, then
push together and turn counterclockwise to release.
Note: The extension lance must be inserted in gun before using
any of the other attachments, and in place for storage. It is
recommended that once extension is connected to leave it in
place.
10
2
J
K
To remove nozzle (J) or rotary nozzle (K) pull back on collar of
lance (I) and pull out nozzle.
F
I
1
9
Publicidad
