Optika Italy IM Serie Manual De Instrucciones página 16

8.7 Installing mini-PC and monitor (IM-300LD4D)
• For the camera installation, please refer to chapter 18.1.
1. Mount the monitor using the supplied screws, using the two
lower holes at the rear of the monitor. (Fig. 9)
2. Using the adhesive Velcro strips already placed on the moni-
tor and the mini-PC, mount the mini-PC. (Fig. 10)
• For better system stability, it is recommended to rest the
mini-PC on the mounting bracket.
8.8 Cable connection (IM-300LD4D)
1. Connect the USB3.0 cable from the camera ① to one of the
USB3.0 ports on the mini PC ②. (Fig. 11)
2. Connect the USB-C cable to the USB-C port of the mini-PC
③. (Fig. 12)
①
③
Page 16
F F ig. 9 ig. 9
F ig. 10 F ig. 10
②
F ig. 11 F ig. 11
F ig. 12 F ig. 12