Optika Italy IM Serie Manual De Instrucciones página 21

10.8 Stage and stage inserts
• For the best image quality, use flasks, Petri dishes and
slides with a 1.2 mm thickness.
1. Place the proper insert for your specimen (according to the
table below) on the stage, and fix it with the stage clip.
2. Turning the X and Y knobs, move the specimen to the re-
quired position. (Movement range: 120 (width) × 78 (length)
mm).
Moving the specimen
Move the specimen to the desired position by freehand or by
turning the knobs ① of the mechanical stage. (Fig. 25)
• When switching objectives, take care not to touch the
holder plates with the objectives, as their weight may
damage the front lens.
M-793.1 Holder for Petri diameter 38 mm (holder for Terasaki needed)
M-793.2 Holder for Terasaki and Petri diameter 65 mm
M-793.3 Holder for slide and Petri diameter 54 mm (provided with the microscope)
M-793.4 Holder for 2+2 slides
M-793.6 Holder for Utermöhl-Chamber (holder for Petri diameter 54 mm needed)
M-793.7 Load-bearing side extension
Page 21
①
F ig. 25 F ig. 25