Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Disposal bag (optional)
If necessary, the pre-separator can be used with a PE disposal bag.
▶ Open the two locking clips on the sides of the cyclone.
Fig. 3: Removing the cyclone
▶ If necessary, remove the existing PE bag or empty the container
(chapter 5.2 „Removing the vacuumed material" on page 21).
▶ Insert a new disposal bag into the container.
Fig. 4: Inserting the disposal bag
20 - en
▶ Fold the bag over the rim of the container.
Fig. 5: Folding the bag
▶ Place the cyclone on the container.
▶ Close the locking clips. Make sure that the disposal bag is not
damaged by the clips.
4.3 Connecting the pre-separator with the
vacuum cleaner and the tool
▶ Connect the connecting hose to the connecting hose connection
(2) of the pre-separator and the suction inlet of the vacuum
cleaner.
▶ Connect the suction hose to the suction inlet of the pre-separa-
tor and to the suction port of the hand tool.
Fig. 6: Connecting the hoses
Publicidad
