Billy Goat Outback BCT4322BCE Manual De Uso página 68

R
1
(4) MOWING DECK ENGAGEMENT SWITCH
1
Pushing the engagement switch to position 1 engages the mowing deck. Pushing it to position 0 disengages the mowing deck.
(5) MAIN POWER SWITCH
0
0 Serves to start up / shut off the engine. It has the following four positions:
STOP
STOP
STOP
STOP
STOP
After the sound signal indicating a full grass catcher, the mowing deck is not disengaged!
(6) PARKING BRAKE LEVER
If the lever is in the braking position, never push it down by hand. Always step on the brake pedal
(7) CRUISE CONTROL
Cruise control is only used when travelling in a long straight line. Before any change in direction it is necessary to deactivate the
cruise control.
The switch needs to be pressed when the mowing deck has already been automatically
disengaged but the blades have not yet stopped rotating (approx. 4 seconds) or when the
mowing deck is started immediately before the reverse travel pedal is stepped on. Then with
every subsequent change in the travel direction from reverse to forward, the disengagement
of the mowing deck is again reactivated.
ENGAGED
1
1
0
0 DISENGAGED
STOP
Ignition off / turn off the ignition
STOP
STOP
STOP
STOP
Turn on / turn off the headlights on the hood
Ignition on, the engine is running.
Start engine – starting position
The parking brake has two positions. In the pushed in position the brake is not engaged, after
pulling it up while stepping down on brake pedal the parking brake is engaged (will brake).
Stepping on the brake pedal will disengage the parking brake and the lever will automatically
be released and shift to the pushed in position.
68
Engagement of the mowing deck / the mowing deck is
engaged
Disengagement of the mowing deck / the mowing deck
is disengaged