cecotec ENERGY SILENCE AERO 5285 CONNECTED Manual De Instrucciones página 8

- This device is designed for domestic use only and is not
intended for bars, restaurants, farmhouses, hotels, motels,
and offices.
- Make sure that the mains voltage matches the voltage
stated on the appliance marking and that the wall outlet is
earthed.
- If the power cord is damaged, it must be replaced by the
official Cecotec Technical Support Service to avoid any type
of danger.
- Do not use the appliance if its cord or housing are damaged,
nor after it malfunctions or has been dropped or damaged
in any way.
- The appliance must be installed in accordance with national
wiring regulations.
- Never insert objects or body parts between the rotating fan
blades.
- To reduce the risk of injury, attach the fan directly to
the support structure of the building as indicated in this
manual and use only parts and components provided and
recommended by Cecotec.
- Cut off the power completely before installing or repairing
the fan to avoid the risk of electric shock.
- The electrical wiring must be in accordance with the local
regulations.
- The cable must be properly earthed to avoid possible
accidents.
- The appliance must be installed in accordance with national
wiring regulations.
- Never install the fan in a damp or wet room.
- Be careful when near the rotating fan blades.
- To adjust the speed of the fan blades, only use the means for
speed control provided by Cecotec.
8
ENERGYSILENCE AERO 5285 CONNECTED | ENERGYSILENCE AERO 5500 AQUA CONNECTED