Parkside PUB 150 A1 Traduccion Del Manual De Instrucciones Originale página 24

GB MT
der to prevent damages to the device.
•­ Switch­off­the­device­during­breaks­or­
when transporting it and wait until the
brush has completely stopped rotating.
Using the device:
When working with metal and ny-
lon brushes, never move the brush
across plastic or other delicate
flooring­material.­The­brushes­could­
scratch or damage the surface. We
do not assume any liability for dam-
ages in this case.
Test the brush beforehand on an
inconspicuous area.
•­ Operate­the­device­at­walking­speed.
•­ The­arrow­
guard indicates the brush's rotational
direction.
•­ Always­test­the­device­in­an­inconspicu-
ous area before using it on sensitive
floors.
Selecting the proper brush
For information on replacing the brush,
please­refer­to­the­"Assembly­instructions"­
section.
Metal brush (
Select this brush for removing persistent
lichenics and moss on robust grounds.
Use the metal brush on robust surfac-
es­only­(road,­pavement)­as­it­may­
damage and/or scratch the ground.
narrow nylon brush (
Select this brush for removing weed, li-
chenics and moss from small narrow joints.
24
on the spray
13):
9):
Cleaning and
maintenance
Always unplug the device
before working on it.
Any work that is not de-
scribed in these Instructions
must be carried out by a ser-
vicing agency authorized by
us. Danger of injury!
Cleaning
Do not jet water onto the
trimmer and do not clean it
under flowing water. This
would result in the danger
of an electric shock and the
trimmer could be damaged.
Always keep the device clean. Do
no use cleaning agents and sol-
vents.
•­ Clean­the­device,­brush­and­splash­
guard with a soft brush or cloth after
every use.
•­ Keep­the­louvres­clean.
Maintenance
•­ Only­use­spare­parts­and­accessories­
that have been supplied or recommend-
ed by the manufacturer.
•­ Always­inspect­the­equipment­before­it­
is to be used. Do not operate the equip-
ment if safety devices, parts of the cut-
ting device or bolts are missing, worn
out or damaged.
•­ Always­inspect­the­brush­before­start-
ing the device. Never use damaged
brushes. Replace any damaged or
worn brush.