cecotec ENERGYSILENCE 9090 SKYLINE SMART Manual De Instrucciones página 41

piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Fan
- Instruction manual
- Remote control
- Remote control battery (CR2025)
3. ASSEMBLY
The fan base is divided in two halves, which fit around the fan body. Both parts are easy to fit
together.
1. Turn the fan body and the two parts of the base upside down.
2. Loosen the fixing nut to be able to fix the base.
3. Fit one half of the base, ensuring that the power cable exits through the central hole and
then, fit the other half. Secure the base using the fixing nut and screw it tightly.
4. Under the base there are two holes for the power cable. Guide the cable through one of
these two holes.
5. Turn the fan upside down and place it on a flat, dry surface.
4. OPERATION
The control panel buttons, located on the top of the fan, have the same functions as those on
the remote control. A beep will sound each time a button is pressed.
Hold the remote control carefully. Do not drop or throw it.
To ensure that the fan receives the command correctly, point the remote control towards the
signal receiver, which is located on the top of the appliance. Make sure that there is nothing
obstructing the signal path.
1. Place the fan on a flat and dry surface. It is designed to be placed on the floor. Connect it to
the mains. Do not use more than one electronical appliance at the same time in the same
socket.
2. Press the power button to switch the appliance on. By default, it will start at low speed and
in normal mode. Press the power button again to switch it off.
3. Press the speed button repeatedly to select the desired speed.
4. Press the mode button repeatedly to select the desired mode from the following: Normal,
Natural or Sleep.
ENERGYSILENCE 9090 SKYLINE SMART
ENGLISH
41