Scope Of Delivery - Waeco PerfectView M59L Instrucciones De Montaje

_M59L_EB_10s.book Seite 39 Dienstag, 22. Januar 2008 4:59 16
PerfectView
Observe the following instructions when working with electrical parts:
When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 8, page 3) or a voltmeter (fig. 1 9, page 3).
Test lamps with an illuminant (fig. 1 12, page 3) take up voltages which
are too high and which can damage the vehicle's electronic system.
When making electrical connections (fig. 3, page 4), ensure that
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection.
Insulate all connections.
Secure the cables against mechanical wear with cable binders or insulat-
ing tape, for example to existing cables.
3

Scope of delivery

No. in
fig. 6,
page 4
1
2
3
4
5
Quantity Description
1 Monitor
1 Monitor base
1 Connection cable
1 Remote control
1 Control box
Scope of delivery
Item number
RV-59-HD
39