Waeco PerfectView M59L Instrucciones De Montaje página 42

_M59L_EB_10s.book Seite 42 Dienstag, 22. Januar 2008 4:59 16
Technical description
The remote control has the following control elements:
No. in
fig. 9, page 6
1
2
3
4
5
6
7
8
9
10
11
42
Label Meaning
STANDBY Switches the power supply on/off (standby)
DOWN This button has three functions:
normal mode: decrease volume
after calling up the menu: change a setting within a
function (e. g. contrast)
when in reverse gear: move the distance markers
downwards
MENU Calls up the menu onto the monitor.
You can call up four menus. Press the button again
to call up each subsequent menu.
PICTURE/BILD: picture setting (e. g. brightness)
USER/NUTZER: select system function (e. g. lan-
guage)
TIME/UHRZEIT: set date and time
INSTALL/AUSWAHL: select application (e. g.
mirror function)
UP This button has three functions:
normal mode: increase volume
after calling up the menu: change a setting within a
function (e. g. contrast)
when in reverse gear: move the distance markers
upwards
SELECT This button has two functions:
select video source (CA1 → CA2 → AV → CA1 ...)
after calling up the menu: select functions (e. g. pic-
ture setting)
PICTURE Calls up the functions for setting the picture
parameters and volume:
CONTRAST
BRIGTNESS
COLOR
TINT
Press the "UP" or "DOWN" button to effect the
desired setting.
DIMMER Decreases brightness to night mode.
C1 Selects camera 1.
C2 Selects camera 2.
C3 Not available
AV Selects the video input (RCA).
PerfectView