Waeco PerfectView M59L Instrucciones De Montaje página 55

_M59L_EB_10s.book Seite 55 Dienstag, 22. Januar 2008 4:59 16
PerfectView
Selecting and installing the camera
➤ Call up the "INSTALL/AUSWAHL" menu.
✓ The following menu is shown:
INSTALL
REAR
CAM1
CAM2
You can set the following parameters:
REAR: select the desired camera as the standard camera (the standard
camera is activated when you shift into reverse gear; the other camera is
activated via the indicator)
– "CAM1": select camera 1 as the standard camera
– "CAM2": select camera 2 as the standard camera
CAM1: switch on/off the mirror function for camera 1
– "NOR": the mirror function is switched off
– "MIR": the mirror function is switched on
CAM2: switch on/off the mirror function for camera 2
– "NOR": the mirror function is switched off
– "MIR": the mirror function is switched on
➤ Select the desired function (e. g. "CAM1") by pressing the "SELECT"
button the appropriate number of times.
➤ Press the "UP" or "DOWN" button to effect the setting as described above.
Using the LCD monitor
CAM1
MIR
NOR
55