Using The Lcd Monitor; Adjusting The Monitor - Waeco PerfectView M59L Instrucciones De Montaje

_M59L_EB_10s.book Seite 51 Dienstag, 22. Januar 2008 4:59 16
PerfectView
– Connect the yellow cable to the indicator light. It serves as the control
cable for switching on a side camera.
– Connect the orange cable to the positive terminal of the reversing light.
It serves as the control cable for switching on a reversing camera.
9

Using the LCD monitor

The camera and the monitor are activated automatically when you engage
the reverse gear, when the ignition is turned on or the engine is running.
9.1

Adjusting the monitor

The monitor is equipped with an on-screen display (OSD) function, which
displays the following information:
Date
Camera
Channel
Mirror mode
Distance markings
These functions can be selected individually for each camera.
If you hold down the "MENU" button, you can call up the following four
menus:
PICTURE/BILD
USER/NUTZER
TIME/UHRZEIT
INSTALL/AUSWAHL
To select the individual menus, proceed as follows:
➤ Hold down the "MENU" button.
✓ The menu "PICTURE/BILD" appears.
➤ Press the "MENU" button again in each case to call up the next menu (see
the sequence above).
Using the LCD monitor
51