Publicidad
;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
System Specifications:
Capacity:
Maximum Deflection:
Service Temperature:
Standards:
Component Specifications:
Figure 2
Component
Reference
A
Support Tube
Fixed Leg
B
C
Adjustable Leg
D
Coarse Adjustment Pin
Fine Adjustment Knob
E
F
D-Ring
Table 1 – Product Specifications
One person with a combined weight (including clothing, tools, etc.) of no more than 420 lb. (190
kg).
The maximum deflection for the anchorage connector and its anchorage connection point as a
result of fall arrest is 0 in. (0 mm).
-40°C (-40° F)
Each product model is certified to, or conforms with, the applicable standards and regulations listed
within Figure 1. If none are specified, then all standards and regulations listed on the cover apply.
;
Product certified to ANSI/ASSP standards has been tested in compliance with the
requirements of ANSI/ASSP Z359.7.
Materials
Aluminum
Tube - Aluminum
Foot - Steel
Pad - Rubber
Aluminum
Steel
Knob - Steel
Screw - Steel
Foot - Steel
Pad - Rubber
Alloy Steel (Tensile Strength - 5,000 lbs (22.2 kN))
4
Publicidad
