INDICATORS
permanently on (blue)
•
1x - 2x indicators: the number of cups
must be selected
•
indicator: indicates the ma-
chine is ready to deliver hot water
•
Cold drink indicator: indicates the
drink selected
permanently on
blinking
permanently on
blinking
permanently on (red)
permanently on (orange)
blinking (orange) +
permanently on (white)
blinking (orange) +
blinking (white)
blinking (orange) +
permanently on (blue)
blinking (orange) +
blinking (blue)
EXPLANATION OF INDICATORS
The machine is ready to deliver cold
drinks
The beans container (A2) is empty
The grinding function has been se-
lected, but the beans container (A2) is
empty
There is not enough water in the tank
(A15) or the tank is not correctly in place
An attempt is being made to prepare a
drink, but the water tank (A15) is empty
The grinding is too fine, so that the cof-
fee is delivered too slowly or not at all.
The coffee filter is clogged
The tank (A15) is not properly in place
and the relative valves are not open
Limescale in the water circuit
General alarm
The coffee spout requires cleaning
The machine is ready for cleaning the
coffee spout
Coffee spout cleaning is in progress
The coffee spout needs to be rinsed
Coffee spout rinsing is in progress
15
OPERATION
Set up the machine and proceed with prepa-
ration of the drink
Fill the beans container
Fill the beans container
Fill the tank with water, or remove the tank
and reposition it correctly
Fill the tank with water
Remove the portafilter (C1) and repeat the
coffee-making steps, bearing in the mind
the indications given in sections "4. Making
coffee" and "4.2 Step 2 - Tamping"
Rinse the filters under running water
Press down lightly on the tank to open the
valves
Descale as described in section "10.
Descaling"
Contact Customer Services
See section "11. Cleaning the coffee spout
(A19)"
→