PROBLEM
After grinding, the amount of coffee in
the filter does not give the "perfect dose"
14. STATISTICS
Machine statistics are useful in the event of service being need-
ed. Proceed as follows:
•
Access the menu by pressing buttons 1x (B2) and
simultaneously and holding for 3 seconds;
•
Turn the dial (B7) to select
•
Press
(B5);
•
Once you have entered the settings menu, select the de-
sired data by rotating the selection dial as shown in the
following table:
Positioning of dial
•
The 1x, 2x, OK,
and
of operations:
Control panel indicators
CAUSE
The "Smart Tamping Station" needs
cleaning
The quantity of ground coffee needs
adjusting
The 2-cup filter is being used
Over time the burrs wear down
"Espresso Cool";
Counter
Total count of descale cycles
Total count of hot drinks
Total count of cold drinks
indicators show the numbers
Drinks
Descale
count
count
up to 100
up to 1
between
between 2
100 and
and 10
1000
between
between 10
1000 and
and 30
3000
Control panel indicators
(B6)
•
The appliance automatically exits the settings menu after
30 seconds of inactivity.
De'Longhi reserves the right to modify the technical specification
and styling of its products at any moment, without compromising
their functionality and quality.
→
...
19
SOLUTION
Carry out cleaning as described in section
"8.3 Cleaning the "Smart tamping sta-
tion"",then repeat the grinding step
Adjust the quantity with the relative dial
(B1) following the indications given in
section "The "perfect dose"". If the dial is
already in the MAX position, proceed as
described in section "7. Settings menu" -
"Extra grinding adjustment"
Make sure the 2x indicator is on
Contact Customer Services
Drinks
count
between
3000 and
6000
between
6000 and
11000
more than
11000
Descale
count
between 30
and 60
between 60
and 110
more than
110