Phonocar VM168 Manual De Instrucciones página 34

VM168
EN
3.3.2 MONITOR STAND WITH ROTATION
4
1
Fig. 9
Fig. 11
Fig. 14
SUPPORT FIXING WITH ROTATION (4)
Slide the pin into the appropriate slide on the back of the monitor (Fig. 9/10/11/12).
Rotate the grille to secure the bracket (Fig. 13).
To adjust the tilt of the monitor, unscrew the knob on the bracket, adjust the tilt of
the monitor and screw the knob back on to secure it (Fig. 14/15).
Attach the anti-vibration double-sided tape to the base of the bracket before
installing it in the passenger compartment (Fig. 16).
N.B. Find the position for the installation of the monitor so that it does not obstruct
the view or the proper operation of safety devices and/or lack the full freedom of
movement necessary for safe driving.
Fig. 10
Fig. 12
Fig. 15
34
Fig. 13
Fig. 16