Phonocar VM168 Manual De Instrucciones página 47

7.8.1 VIDEO RECORDING
1
SINGLE CHANNEL DISPLAY
1 1
3
CHANNEL DISPLAY
MULTIPLE
VIDEO RECORDING WITH 1 CAMERA CONNECTED
To start recording videos, press the "SEL" button (F): the flashing
"REC" icon will appear in the upper left corner of the monitor.
To stop recording, press the "SEL" key (F): the "REC" icon will
disappear.
The DVR function is active only if an SD Card has been inserted, see
Chapter 7.8.
VIDEO RECORDING WITH 2/4 CAMERAS CONNECTED
If additional cameras are installed, it is possible to use the DVR
function for one camera or for all connected cameras.
D
2
4
D
1
REC
1 1
REC
3
REC
VIDEOCAMERA
To activate the DVR function on only one of the connected cameras,
use the "CH" key (D) to select the channel related to the camera
and, from that screen, press the "SEL" key (F) to either start or stop
recording.
2/4 CAMERAS (GRP)
To activate the DVR function on two or more cameras use the "CH"
key (D) to select the "multiple view" channel and press the "SEL"
key (F) to both start and stop recording.
47
VM168
EN
F
REC/STOP
2
REC
4
REC
F
REC/STOP