Yamaha E60HMHD Manual De Servicio página 252

CYLINDER HEAD
2. Install
• Cylinder head and cylinder head cover
NOTE:
Tighten the cylinder head mounting bolts
and nut in sequence and in two steps of
torque.
Cylinder head mounting bolt and nut:
1st: 15 N•m (1.5 kgf•m, 1.1 ft•lb)
2nd: 32 N•m (3.2 kgf•m, 2.3 ft•lb)
INSTALLING THE THERMO SWITCH
Install
• Thermo switch
NOTE:
Push rubber portion of thermo switch 1 into
the bottom of the flange of cylinder head
cover 2.
5-29
E