Silk’n Motion Premium H3220 Instrucciones De Uso página 15

U
The treatment surface (#6) creates temporary pressure
marks on the treated area so you can see areas you have
treated.
U
After each pulse, move the treatment surface (#6) to the
next spot. Keep doing this pulsing action for the area you
are treating.
U
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for working at lower energy levels.
U
Press the treatment surface (#6) firmly against your skin
and slowly glide over your skin (either across or down as
shown in the image). Make sure that the treatment surface
(#6) is always touching your skin.
U
At lower energy levels, the device takes only 1-1.5 seconds
to recharge between pulses. This generates a nonstop
sequence of flashes.
U
Glide at a speed so that you avoid gaps or overlaps.
C
Do not treat the same area of skin more than once per hair
removal session.
C
Stop use immediately if you have any discomfort.
6.4 Device sensors
Your Silk'n Motion Premium has three sensors. for touch,
movement, and color.
U
Touch and Movement: The device will only emit
repeated pulses when it is in firm contact with your skin,
and you keep moving it across your skin.
13
EN