Silk’n Motion Premium H3220 Instrucciones De Uso página 18

3. Deliver one pulse on a different spot at energy level 2. Use
the energy levels indicated on the skin color chart. Wait 24
hours. If there are no adverse effects, use a different test
EN
spot and continue testing at increased energy levels to
find the highest level that is comfortable for you, without
adverse effects.
4. When you find the highest energy level that is most
comfortable for that treatment area, you can start your
treatment.
C
Use a lower energy level if you experience any discomfort.
Be sure to do a spot test for each part of the body you wish
to treat.
7.2 Treatments with Silk'n Motion Premium
Follow these steps each time you treat an area.
1. Before treating an area, the skin should be shaved, clean,
dry and free of any powders, antiperspirants or deodorants.
Do not wax, pluck or tweeze the hair out.
y
2. Press the control button (#4). The device will turn on, the
level 1 energy indicator light (#1) will be on, and a fan
sound will start.
3. Approximately 1 second after pressing the control button
(#4), the ready light (#3) will turn on. The device is then
ready to use at the lowest energy level.
Set the energy level. Press the control button (#4)
4.
repeatedly to increase the energy level until you have
the level you want. The energy level indicator lights (#1)
indicate the energy level setting (refer to section 6.2 Energy
levels).
Be sure to cover up moles, warts or other marks on
the skin that should not be treated.
16